Veteran-Owned Business
Engine, crankshaft & cylinder head machine work, done right, done here.
Same owner, same Stafford shop since 1975. Serving the Houston area.
Ultrasonic cleaning · Head & engine rebuilds · Crank grinding · Valve jobs · Pressure tests · Flywheels · Time-Serts
☎ Call (281) 499-51312435 N Main St, Stafford, TX 77477
What We Do
- Ultrasonic head & parts cleaningHeads, blocks and parts cleaned deep into every passage before machine work.
- Cylinder head rebuilds
- Engine rebuilds, from lawn equipment up to heavy equipment diesels
- Crankshaft grinding
- Valve jobs
- Head pressure tests
- Flywheel resurfacing
- High-performance head and engine work
Foreign and domestic. All work done on site in our Stafford shop.
Time-Sert® Thread Repair
We install Time-Sert® solid steel thread repair inserts on industrial engines to permanently repair stripped threads, such as head bolt or spark plug holes. That often saves a head or block that would otherwise have to be replaced.
GM LS & LT Engines
We do cylinder head and valve work on the GM LS and LT family, including the L83, L86, and L8T. Our radius-cut valve work, with the angles we cut, is equal to or better than factory.
Foreign, domestic & heavy equipment engines
We machine and rebuild foreign and domestic engines of every size, from small gas engines to big diesels in heavy construction equipment. Call and tell us what you've got.
Equipment We Work On
Heavy equipment engines from the major construction makers, including Caterpillar up to a D8 dozer.
- Caterpillar
- John Deere
- Komatsu
- Case
- Volvo
- Hitachi
- JCB
- Kubota
- Bobcat
- New Holland
- Perkins
- Yanmar
Limited auto repair and motor installs are available on request.
Motor-Head Machine is an independent shop and is not affiliated with these manufacturers.
Recent Work
Meet Frank
Frank grew up in Victoria, Texas, riding horses and working on anything with an engine. He started his career at 19 as a training machinist at Victoria Machine Works. At 21 he went to work at EIN Valve Controls, working two jobs while he went through drafting school and several tech schools.
In 1966 Frank was drafted into the U.S. Army. He served two years as a combat engineer and bridge specialist with the 24th Infantry Division, made sergeant within 30 days of arriving, and got out as a Sergeant E-5.
Back home, Frank went right back to the trade. He started Motor-Head out of his house in 1974 and moved into the Stafford shop in 1975, where he still works today, more than 50 years later.
Frank has been cutting three-angle valve jobs since 1974, along with radius cuts and head porting and polishing. He builds custom engines, hot rods and custom trucks, and some of his engines have been running strong for 40 or 50 years. He’s known for fixing what other people can’t, and the shop handles industrial engines too, from Caterpillar, John Deere and Case to Allis-Chalmers and the old two-cylinder Poppin’ Johnny Deeres.
“One of the most important things in a business is making sure the customer’s happy. If they’re happy, I’m happy. If the motors run good, I’m happy.”
Outside the shop, Frank is a family man with a daughter, a son and grandkids. He’s a lifelong cowboy who still keeps horses, and he has been a member of the Houston Livestock Show and Rodeo since 1990. He was involved with the Grand Entry committee before it even started.
What Customers Say
“Very quick service! Got in on a Wednesday for front and valve cover cleaning, got a call the next morning at 10 am that they were already done! … Would 100% return to this location again, very great service.”
“Motor-head is an amazing shop! Frank, his daughter, and staff are phenomenal. They did a great job on our car’s engine. They had very reasonable prices. … I highly recommend Motor-head.”
“The work performed by Frank and his team was phenomenal and the amount of detail and knowledge was remarkable. … Frank provided tons of help and insight even past the machine work he provided.”
Common Questions
Can I ship my head, crankshaft, or engine to you?
Yes. We accept cylinder heads, crankshafts, engines, and other parts shipped to our shop on a pallet or in a crate, from anywhere in the country. When the work is done, we can ship it back to you. Call us before you ship so we can go over the job and the shipping details.
How long does a job take?
A complete engine rebuild usually takes 1 to 2 weeks. Cylinder heads, including valve jobs, are usually done in 24 to 48 hours, depending on parts availability. Crankshaft polishing and grinding usually takes 24 to 48 hours.
Do you work on diesel engines?
Yes. We rebuild engines from small lawn equipment all the way up to large diesels.
What kind of large equipment can you handle?
We work on engines from all the major construction equipment makers, including Caterpillar (up to a D8 dozer), John Deere, Komatsu, Case, Volvo, Hitachi, JCB, Kubota, Bobcat, and New Holland. Give us a call to talk about your machine.
Do I need an appointment?
Walk-ins are welcome. For bigger jobs, it's always better to call ahead and set up an appointment.
What forms of payment do you take?
We take cash, checks, and credit cards. Bigger jobs require a deposit.
Can I bring in just the cylinder head?
Yes. You’re welcome to bring in a cylinder head, crankshaft, flywheel, or any other engine component requiring machining, and we’ll take care of it for you.
Visit the Shop
Motor-Head Machine
2435 N Main St
Stafford, TX 77477
(281) 499-5131
frank@motor-head.com
Hours
Monday – Friday: 8:00 am – 5:00 pm
Saturday & Sunday: Closed